Trouble shoot customer concern. Verified #1 cylinder misfire. Technician performed compression test and verified 70 psi. on cylinder #1. Verified all other cylinders at 130 psi. Removed head and verified oil in cylinder. Removed and replaced left head bank 1. Replaced all spark plug and installed new Cylinder deactivation solenoid. Replaced new head gasket, intake gaskets, exhaust gaskets, oil and oil filter. Installed new thermostat and water pump gasket.. Road tested and verified customer concern did not return.
DANIEL C. gave our service a 5 star review on 4/28/2025
Removed and replaced all listed parts. Flushed cooling system and replenished. Pressure tested and verified no leaks present. Replaced upper and lower radiator hose. Installed water pump and changed all spark plugs at customers request. Road tested good.
WATER PUMP – Remove & Replace – V8
SPARK PLUGS – Remove & Replace – V8
THERMOSTAT &/OR GASKET – Remove & Replace – V8
William K. gave our service a 5 star review on 5/8/2024
Trouble shoot customer concern. Code for Torque convertor. Ran multiple test and verified transmission bad. Removed and replaced transmission. Topped off with ATF+4 transmission fluid. Performed tcm relearn and verified shifting point good. Road tested and verified customer concern did not return.
TRANSMISSION ASSEMBLY – Remove & Replace – Trans Mfr CD 68RFE,In-Line6,4WD
Enriqe V. gave our service a 5 star review on 2/27/2024
Trouble shoot customer concern. Found rear right side brake and turn signal lamp. inoperable. Removed and replaced brake light and reverse light. Tested and verified all lights operable.
BABE L. gave our service a 5 star review on 3/28/2023
Trouble shoot customer concern. Ran diagnostic trouble scan and found code for power steering code. Technician performed diagnostic test and verified all wiring to power steering module good. Removed and replaced Power steering module. New tie rods were included with module. Re set parameters and re calibrated new module. Took down to Thompson tire for alignment. Test drove and verified customer concern did not return.
STEERING GEAR ASSEMBLY – Remove & Replace – Rack & Pinion Type Gears – [Includes: Additional time for use of scan tool to perform this procedure.] – [Includes: Adjust toe-in on Rack and Pinion type Steering Gears. NOTE: Deduct .4 if alignment is also perf
Alignment
GREG G. gave our service a 5 star review on 9/28/2022